PRODUCTS CENTER

chad Thermoplastic foam insulation composite board

Thermoplastic foam board is a sandwich structure board composed of continuous fiber reinforced thermoplastic unidirectional tape orthogonal composite as a reinforced skin, foamed core material as an intermediate core material, and composite by hot pressing. This kind of plate has good heat insulation, heat preservation effect. Typical end-uses include the van industry, cold chain logistics, RVs, etc.

Category:

chadThermoplastic foam insulation composite board

Phone:400-888-8888

Inquire

Product Description

Product Features

1. Light weight

Foam board density is relatively small, the weight is very light, can greatly improve the load weight ratio;

2. High strength

Impact resistance, both rigid and flexible, can resist physical stress impact and damage;

3. Easy to assemble

Assembly is very convenient, low cost, can be assembled with screws, hollow rivets, can also be bonded or hot melt welding;

4. Waterproof and moisture-proof

This is the unique difference between foam board and wood board. This material has good sealing performance and does not leak water,

Even if the surface damage does not absorb water;

5. Strong weather resistance

PP honeycomb board is a glass fiber reinforced thermoplastic material, the use of a larger temperature range, between -40 to +80 degrees Celsius;

6. Strong resistance to chemical attack

PP honeycomb panel has high corrosion resistance to grease, salt water and common chemicals.

7. The product is environmentally friendly, recyclable and odorless.

Product selectable parameters

● Sandwich material: PP, PE, PS or PET foam

Foam board thickness: ≤ 40mm

● Plate width: ≤ 2800mm, length customized according to requirements;

● Color: regular natural color, black, other colors can be customized

● Surface effect: can be attached to anti-ultraviolet, anti-aging film, can also use aluminum alloy plate

Product use: refrigerated containers, refrigerated trucks, cold storage, etc.

Storage

In the absence of special requirements, the product should be stored in a dry and cool place indoors.

To ensure safety and avoid damage to the product, the stacking height of the pallet should not exceed three layers. When stacking two or three layers high, the requirements

Move the upper tray correctly and smoothly.

Packaging Information

Using kraft paper, wrapping film, tray packaging;

Product Application

Technical indicators

Serial Number	Test Item	Test standard	Unit	Test data
1	Thickness (mm)	/	mm	10~40
2	Area weight (kg/m²)	/	Kg/m²	-
3	Roller peel strength (N)	GB/T1457	N	≥ 120
4	Compression strength	GB/T 1453	MPa	≥ 1.4
5	bending strength	GB/T1456	MPa	≥ 11